Nonwoven abrasive flap wheel

Nonwoven abrasive flap wheel

Description:


Nonwoven abrasive flap wheel TS U 23.9-37460785-001: 2019.

Producer: LLC Abramat. By buyer's order, it is possible to manufacture products of other standard sizes and grit.

Application: nonwoven abrasive flap wheel is used for intermediate and finishing operations of grinding surfaces, for decorative processing - satin finish, creating patina on surfaces made of bronze, brass, aluminum, stainless steel and other metals and non-metallic materials. Excellent results were shown by profiled circles made of non-woven grinding material in intermediate and finishing operations when processing molded wood products. The grinding wheel is well shaped and used for machining shaped surfaces. Petal wheels of non-woven abrasive cloth with a ratio of the height of the wheel to its diameter greater than one (grinding shafts) are used for grinding large flat parts. The petal wheel guarantees uniform grinding to its full wear.

Equipment: manual electro and pneumatic machines, stationary grinding machines and machine tools of the type through passage.

Basis: nonwoven grinding material.

Abrasive material: electrocorundum, silicon carbide, zirconium electrocorundum.

Recomendations for use: rotation direction of the wheel is not regulated. The rotation speed V and the working revolutions N of the flap wheel must not exceed those indicated on the label. The force of pressing the circle to the workpiece should be as small as possible. The deformation (deflection) of the petals during operation should be 1 - 2 mm, depending on the outer diameter of the circle and the degree of wear.



Back to the section