Nonwoven abrasive disc

Nonwoven abrasive disc

Description:


Nonwoven abrasive disc TS U 23.9-37460785-001: 2019.

Producer: LLC Abramat. By buyer's order, it is possible to manufacture products of other standard sizes and grit.

Applications: nonwoven abrasive disc are nylon fibers glued together with abrasive grains, then the resulting mixture is laid in layers, compacted and cut as needed. Grinding wheels made of non-woven abrasive material are used to clean and polish welds in the internal corners in one technological transition, to clean the surface from corrosion, rust, easy cleaning, removal of small defects of the material, rounding of sharp edges, final polishing of the product. In fine grinding and polishing operations, grinding wheels showed great wear resistance. When working, discs do not contaminate work surfaces. Disks are made of various grain sizes, various standard sizes and with various rigidity of a sheaf. The best result of grinding, without burning on the surface, is achieved by synchronizing the speed of rotation of the wheel with the feed speed of the workpiece with low clamping forces.                                                                Recommended cutting speed 25-30 m / s. Nonwoven abrasive discs of various grain sizes have proven themselves as an alternative to 3M, Klingspor wheels for processing various metal products in a lower price segment

Equipment: manual electro and pneumatic machines.

Basis: pressed non-woven grinding material.

Abrasive material: electrocorundum, silicon carbide

Recomendations for use: rotation direction of the disc is not regulated. The rotation speed V and the working speed N of the pressed disc must not exceed those indicated on the label. The best result of grinding, without burning on the surface, is achieved by synchronizing the speed of rotation of the wheel with the feed speed of the workpiece with low clamping forces. Recommended cutting speed 25-30 m / s.



Back to the section