Combined flap wheel with M14 landing thread

Description:


Combined flap wheel with a M14 landing thread TS U 23.9-37460785-001: 2019.

Producer: LLC Abramat, Kharkov, Ukraine. By buyer's order, it is possible to manufacture products of other standard sizes and grit.

Application: combined flap wheel with M14 thread is used for intermediate and final operations of grinding surfaces, for decorative processing - satin finish, creating patina on surfaces of bronze, brass, aluminum, stainless steel and other materials and non-metallic materials. Excellent results were shown by profiled combined wheels in intermediate and finishing operations when processing molded wood products. A feature of the flap wheel is the M14 connecting thread, which allows you to quickly set the wheels on the spindle of an angle grinder. Angle grinder should be able to adjust speed. Combined flap wheel is well profiled and is used for machining shaped surfaces. The combined flap wheel provides uniform grinding to its full wear.

Equipment: manual electro and pneumatic machines with speed control.

Basis: nonwoven grinding material, grinding skin.

Abrasive material: electrocorundum, silicon carbide, zirconium electrocorundum.

Recomendations for use: rotation direction of the wheel is strictly in the direction of the arrow indicated on the label. The rotation speed V and the working revolutions N of the flap wheel must not exceed those indicated on the label. The force of pressing the wheel to the workpiece should be as small as possible. The deformation (deflection) of the petals during operation should be 1 - 2 mm, depending on the outer diameter of the wheel and the degree of wear.



Back to the section