Nonwoven abrasive flap wheel with M14 landing thread

Nonwoven abrasive flap wheel with M14 landing thread


Nonwoven abrasive flap wheel with M14 landing thread TS U 23.9-37460785-001: 2019.

Producer: LLC Abramat. By buyer's order, it is possible to manufacture products of other standard sizes and grit.

Application: nonwoven abrasive flap wheel with M14 landing thread is used for intermediate and finishing operations of grinding surfaces, for decorative processing - satin finish, creating patina on surfaces made of bronze, brass, aluminum, stainless steel and other metals and non-metallic materials. Excellent results were shown by profiled wheels made of non-woven grinding material in intermediate and finishing operations when processing molded wood products. A feature of the flap wheel is the M14 connecting thread, which allows you to quickly set the wheel on the spindle of an angle grinder. Angle grinder should be able to adjust speed. The grinding wheel is well shaped and used for machining shaped surfaces. The petal wheel guarantees uniform grinding to its full wear.

Equipment: manual electro and pneumatic machines with speed control.

Basis: nonwoven grinding material.

Abrasive material: electrocorundum, silicon carbide, zirconium electrocorundum.

Recomendations for use: rotation direction of the wheel is not regulated. The rotation speed V and the working revolutions N of the flap wheel must not exceed those indicated on the label. The force of pressing the wheel to the workpiece should be as small as possible. The deformation (deflection) of the petals during operation should be 1 - 2 mm, depending on the outer diameter of the wheel and the degree of wear.

Back to the section